Which receivers fit?

Most M1A/M14 receivers including but not limited to Springfield Armory, LRB Arms, Armscorp, Enterprise, Norinco, and Polytec.

Receivers and RiflesJAE-100 G3
NO Selector Cut Out
JAE-100 G3
WITH Selector Cut Out
LRB M25YesYes
LRB M14SAYesYes
Springfield Super Match M1ATMYesNo*
Springfield National Match M1ATMYesYes
Springfield M25 WhitefeatherTMYesNo*
Springfield M21 TacticalTMYesNo*
Springfield Loaded M1ATMYesYes
Springfield Standard M1ATMYesYes
Springfield Scout M1ATMYesYes
Springfield SOCOM II (Top rail only)YesYes
Springfield SOCOM 16YesYes
ARMSCORPYesYes
Fulton Armory M14YesYes
NorincoYesYes
PolytecYesYes
MOST USGI Semi Auto ReceiversYesYes
MOST USGI Select Fire ReceiversNoYes

*The JAE-100 G3 WITH selector cut out will NOT fit a rear lugged receiver.

For older Springfield Receivers (1980’s or early 1990’s) please call for a fit check.

NOTE: Some glass bedded Rifles and Chinese Receivers have a shorter connector pin and should be replaced with a USGI Standard size connector pin when using with JAE-100 stock. Since the JAE-100 has relief to accommodate the standard length pin, the shorter pin can work its way out.

Brownells carries the lock and pin:


What is the largest barrel size that will work?

Since the JAE-100 G3 has a straight contour, it will fit all barrel sizes, including the Heavy Barrels.


Do you offer a military or law enforcement discount?

Yes. There is a 5% discount off Retail Price for the entire order for Active LEO / Military / Firefighters.


What is the lead time from order date?

Lead times vary so it is best to contact us at 714-692-3523 or email info@jallenglobal.com to find out what the current wait time is.


Is glass bedding required?

No. The two metal lug slides are drawn into the stock with the action and then you tighten the bolts on the bottom. They act like a door wedge and mate the receiver to the stock for a tight fit. This eliminates the need for glass bedding and allows you to remove the action and reinstall as often as you like without any degradation or loss of zero.


How does the barrel tensioner work?

It connects through the slot in the barrel band and allows you to adjust the tension up or down on your barrel; thus potentially improving your shot groups. Since everyone’s rifle has different tolerance stack ups, the tension on the front end may or may not be where it needs to be and with the barrel tensioner you can make these fine adjustments.


Is the stock California Compliant?

Yes. Since, per the California DOJ, they only provide guidance, not approvals for stocks, JAE corresponded over several months and designed the JAE-100 grip with their input to ensure that our stock would be in compliance with the California laws.

In an excerpt from a California DOJ letter to JAE dated October 22, 2003, they confirm the definition of an assault weapon:

“California Penal Code section 12276.1 provides, in pertinent part: “(a) NotwithstandingSection 12276, ‘assault weapon’ shall also mean any of the following: (1) A semiautomatic, centerfire rifle that has the capacity to accept a detachable magazine and any one of the following: (A) A pistol grip that protrudes conspicuously beneath the action of the weapon…” In addition, Section 978.20, subdivision (d) of the California Code of Regulations provides, “pistol grip that protrudes conspicuously beneath the action of the weapon’ means a grip that allows for a pistol style grasp in which the web of the trigger hand (beneath the thumb and index finger) can be placed below the top of the exposed portion of the trigger while firing.”

As you can see in the photo below, we have designed the JAE-100 grip so that, when grasped normally, the web of the trigger hand would be placed well above the exposed portion of the trigger.

JAE-100-G3-Basic-Stock-large

Which receivers fit?

Currently there are cages to fit the Remington 700 Short Action and the Long Action (or clones). The Surgeon Short Action 591/R fits in the same cage as the Remington 700 Short Action and the Surgeon Long Action 1086/R fits in the same cage as the Remington 700 Long Action. Eventually we will be making cages for other models, but if you’re not sure about fit, please contact us.


What is the largest barrel size that will work?

A 1.35” barrel diameter will fit and still be free-floated.


Do you offer a military or law enforcement discount?

Yes. There is a 5% discount off Retail Price for the entire order for Active LEO / Military / Firefighters.


What is the lead time from order date?

Lead times vary so it is best to contact us at 714-692-3523 or email info@jallenglobal.com to find out what the current wait time is.


Is glass bedding required?

No. The 2 Action Screws tightened to 65 inch pounds, hold down the receiver into a machined cage which is interlocked into the machined chassis. Action can be removed repeatedly without affecting zero. The action screws are captured so they don’t fall out when the action is removed.


What magazines work with the JAE-700 and where can they be purchased?

Currently we have Collets that are for AICS Short or Long Action magazines. There are several distributors that sell them including www.brownells.com, www.midwayusa.com and https://store.thirdgenerationshootingsupply.com/catalog/category/view/s/j-allen-stocks/id/9553/.

Model Numbers for Magazines

  • AICS Short Action (.223) 10 round – Model 6616
  • AICS Short Action (.308) 5 round – Model 3901
  • AICS Short Action (.308) 10 round – Model 3902
  • AICS Long Action (.300) 5 round – Model 0479
  • AICS Long Action (.338) 5 round – Model 2468
  • The AI AW magazines and AI CIP magazines will also fit in the JAE-700 Chassis as long as the Action is set up for them.

Which receivers fit?

The Surgeon 1581 XL Action, which can be found here: https://surgeonrifles.com/product/1581-xl-action-repeater/


What is the largest barrel size that will work?

A 1.35” barrel diameter will fit and still be free-floated.


Do you offer a military or law enforcement discount?

Yes. There is a 5% discount off Retail Price for the entire order for Active LEO / Military / Firefighters.


What is the lead time from order date?

Lead times vary so it is best to contact us at 714-692-3523 or email info@jallenglobal.com to find out what the current wait time is.


Is glass bedding required?

No. The 2 Action Screws tightened to 65 inch pounds, hold down the receiver into a machined cage which is interlocked into the machined chassis. Action can be removed repeatedly without affecting zero. The action screws are captured so they don’t fall out when the action is removed.


What magazines work with the JAE-700 and where can they be purchased?

Currently we have Collets that are for AICS Short or Long Action magazines. There are several distributors that sell them including www.brownells.com, www.midwayusa.com and https://store.thirdgenerationshootingsupply.com/catalog/category/view/s/j-allen-stocks/id/9553/.

Model Numbers for Magazines

  • AICS Long Action (.300) 5 round – Model 0479
  • AICS Long Action (.338) 5 round – Model 2468
  • The AI AW magazines and AI CIP magazines will also fit in the JAE-700 Chassis as long as the Action is set up for them.

Which receivers fit?

The Tikka T3 and T3X models.


What is the largest barrel size that will work?

A 1.35” barrel diameter will fit and still be free-floated.


Do you offer a military or law enforcement discount?

Yes. There is a 5% discount off Retail Price for the entire order for Active LEO / Military / Firefighters.


What is the lead time from order date?

Lead times vary so it is best to contact us at 714-692-3523 or email info@jallenglobal.com to find out what the current wait time is.


Is glass bedding required?

No. The 2 Action Screws tightened to 65 inch pounds, hold down the receiver into a machined cage which is interlocked into the machined chassis. Action can be removed repeatedly without affecting zero. The action screws are captured so they don’t fall out when the action is removed.


What magazines work with the JAE-700 TIKKA and where can they be purchased?

Currently we have Collets that are for AICS Short or Long Action magazines. There are several distributors that sell them including www.brownells.com, www.midwayusa.com and https://store.thirdgenerationshootingsupply.com/catalog/category/view/s/j-allen-stocks/id/9553/.

Model Numbers for Magazines

  • AICS Short Action (.223) 10 round – Model 6616
  • AICS Short Action (.308) 5 round – Model 3901
  • AICS Short Action (.308) 10 round – Model 3902
  • AICS Long Action (.300) 5 round – Model 0479